Faulhaber
  • FAULHABER wereldwijd 
      Contact
      • Argentijnen Australië België Brasilia China Denemarken Duitsland Finland Frankrijk Hongarije Ierland
      • India Israël Italië Japan Korea Liechtenstein Luxemburg Maleisië Nederland Noorwegen Oostenrijk
      • Polen Portugal Rusland Singapore Slovakije Spanje Taiwan Thailand Tsjechië Turkije Verenigd Koninkrijk
      • Verenigde Staten Zuid-Afrika Zweden Zwitserland Internationaal
  • Nederlands 
    • English
    • Deutsch
    • Français
    • 中文
    • Nederlands
  • Producten
    • DC-motoren
      • DC-micromotoren
        • 0615...S 0816...SR 1016...SR 1024...SR 1219...G 1224...SR 1319...SR 1331...SR 1336...CXR 1516...S 1516...SR 1524...SR
        • 1624...S 1717...SR 1724...SR 1727...CXR 1741...CXR 2224...SR 2230...S 2232...SR 2233...S 2237...CXR 2342...CR 2642...CR
        • 2642...CXR 2657...CR 2657...CXR 2668...CR 3242...CR 3257...CR 3272...CR 3863...CR 3890...CR
      • Platte DC-micromotoren en DC-tandwielmotoren
        • 1506...SR 1506...SR IE2-8 1512...SR 1512...SR IE2-8 2607...SR 2607...SR IE2-16 2619...SR 2619...SR IE2-16
    • Borstelloze DC-motoren
      • Borstelloze DC-servomotoren
        • 0308...B 0515...B 0620...B 0824...B 1028...B 1218...B 1226...B 1628...B 1660...BHS 1660...BHT 2036...B 2057...B
        • 2057...BHS 2232...BX4 2250...BX4 2250...BX4S 2264...BP4 2444...B 3056...B 3242...BX4 3268...BX4 3274...BP4 3564...B 4490...B
        • 4490...BS
      • Borstelloze platte DC-micromotoren en Borstelloze DC-tandwielmotoren
        • 1509...B 1515...B 2610...B 2622...B
    • Motoren met geïntegreerde electronica
      • Motoren met geïntegreerde Speed Controller
        • 1525...BRC 1935...BRC 2232...BX4 SC 2250...BX4 SC 2250...BX4S SC 2610...B SC 2622...B SC 3153...BRC 3242...BX4 SC 3242...BX4 SCDC 3268...BX4 SC 3268...BX4 SCDC
      • Motoren met geïntegreerde Motion Controller
        • 2232...BX4 CxD 2250...BX4 CxD 3242...BX4 Cx 3268...BX4 Cx 3564...B Cx MCS 3242...BX4 ET MCS 3242...BX4 RS/CO MCS 3268...BX4 ET MCS 3268...BX4 RS/CO MCS 3274...BP4 ET MCS 3274...BP4 RS/CO
    • Lineaire DC-servomotoren
      • LM 0830...01 LM 1247...11 LM 1247...12 LM 1483...11 LM 1483...12 LM 2070...11 LM 2070...12
    • Stappenmotoren
      • AM0820 AM1020 AM1524 AM2224 AM2224R3 DM0620 DM1220
    • Industriële aandrijvingen
      • 6091...DC01 MA... 6091...DC01 MD...
    • Piezo motors
      • LL06... LL10... LR17... LR50... LR80... LT20... LTC300... LTC40... LTC450...
    • Precisietandwielkasten
      • Planetaire reductoren
        • 03A 06/1 06A 08/1 10/1 12/4 13A 14/1 15/10 15A 16/7 17/1
        • 20/1R 22/7 22E 22EKV 22F 23/1 26/1 26/1R 26A 30/1 30/1S 32/3
        • 32/3R 32A 32ALN 38/1 38/1S 38/2 38/2S 38A 44/1
      • Spurgears en Spurgears, spelingsvrij
        • 08/2 08/3 12/3 12/5 15/5 15/5S 15/8 16/5 16/5S 16/8 16A 22/2
        • 22/5
    • Lineaire componenten
      • kogelomloopspindels
        • BS22-1.5 BS32-2.0
      • Spindels en opties
        • M1,2 x 0,25 x L1 M1,6 x 0,35 x L1 M2 x 0,2 x L1 M3 x 0,5 x L1
    • Encoders
      • Incrementele encoder
        • HEDL 5540 HEDS 5500 HEM3-256 HXM3-64 IE2-1024 IE2-16 IE2-400 IE3-1024 IE3-1024L IEH2-4096 IEH3-4096 IEM3-1024
        • IER3-10000 IER3-10000L IERS3-500 IERS3-500L PA2-100 PA2-50 PE22-120
      • Absolute encoders
        • AES-4096 AESM-4096
    • Aandrijfelectronica
      • Speed Controllers
        • SC 1801 F SC 1801 P SC 1801 S SC 2402 P SC 2804 S SC 5004 P SC 5008 S
      • Motion Controllers
        • MC 5004 P MC 5005 S MC 5010 S MCBL 3002 F MCBL 3002 F AES MCBL 3002 P MCBL 3002 P AES MCBL 3002 S MCBL 3002 S AES MCBL 3003 P MCBL 3003 P AES MCBL 3006 S
        • MCBL 3006 S AES MCDC 3002 P MCDC 3002 S MCDC 3003 P MCDC 3006 S MCLM 3002 F MCLM 3002 P MCLM 3002 S MCLM 3003 P MCLM 3006 S MCST 3601
    • Accessoires
      • 6501.00065 6501.00088 6501.00096 6501.00097 6501.00113 6501.00121 6501.00135 6501.00136 6501.00159 6501.00283 6501.00284 BC 5004
      • Cables and Accessories MBZ
  • Markten
    • Medische en laboratoriumapparatuur
      • InsulinepompAnalytisch apparaat Gyrolab xPlore TMLaboratoriumautomatiseringAnaesthesia and ventilation systemMyo-elektrische protheseWortelkanaalbehandeling zonder StressProsthetics LifeHandTattoo machineSample distribution systemRobotic assistant for TMSViKY (Vision Control for endoscopY)Blood pressure measuring
      • Drug dispenserDiagnostic and therapy capsulesXYZ manipulatorControlled prosthetic legBlood circulation scannerLaboratory analysis systemsMicrokeratomeBlood glucose meterMiniature hexapods
    • Fabrieksautomatisering & robotica
      • Diepzee robotInspectie robotsZippermastSmall parts gripperIndustrial robotsCHIMP robotUnmanned Ground Ve­­­hicleMROV (Miniature Remotely Operated Vehicles)Humanoid service robotsRobotic armRobotic handRobot Vehicle
      • Assembly machinesManufacture robotikSewer RobotShrimp VehicleBelt conveyorsElectropneumatic Swivel Unit
    • Precisiecontrole & meettechniek
      • DoseerpompTestfaciliteiten voor autodeurenBreedbandseismometersCondor Sigma test deviceElectric field metersStripping machinesNanomeasurementHorizontal Balancing MachinesPrecision dispenserDial Gauge TestingRing shear testerGeo-Scanner
    • Industrieel gereedschap en materiaal
      • SensorschroevendraaierInkjet labelling systemElektrische snoeischaren5-axis CNC unitAdaptive Wire FeederSolar wafer productionWindow WipersWeighing SystemLinear positionersPressure pulsationsLaser weldingHexapod (Micropositioning technology)
      • Flying-Probe-SystemsPrinting machineCutting Plotter
    • Lucht- & ruimtevaart
      • Mars RoverAmfibische vliegtuigCabinetechniekComet probe "Rosetta Mission"HexapodControl rocket fuel valvesUAVs (Unmanned Aerial Vehicle)Measuring sensor
    • Camera, audio en data
      • Panoramic cameraCamera set upReconnaissance DronesLCD displaysCamera head inspection devicesCamera CranesLive Camera Systems
    • Optica & fotonica
      • RöntgenlenzenPulsed-laser beamsSurgical vision systemsMicroscope Scanning StageSurgical microscope head setGiant telescopeLBT (Large Binocular Telescope)
    • Bescherming van milieu & gezondheid
      • Automatische mechatronische zekeringssysteem voor klimmers (EPIC)ATEX Pump driveEnergy kitesSeismometerMicro annular gear pumpDeep-Sea Sensors
    • Modelbouw & prototypes
      • Zelfrijdende raceautos'sMiniatur WunderlandCommercial Vehicle ReplicasSpherical VehicleModel steam locomotiveFootball robot
    • Consumer
      • Kinetische sculptuur in de showroome-CaddiesStoelloze stoelHorlogebewegerDesign Water dispenserSoccer robots

  • Support
    • Drive Electronics
      • Application Notes for Drive ElectronicsDrive Electronic FAQ'sDownloadsDocumentation for Drive Electronics
    • Encoder
      • Application Notes for Encoders & SensorsEncoder FAQ'sDocumentation for Encoders
    • Motors
      • Motor Application NotesDocumentation for Motors
    • Documentatie
      • FAULHABER Catalogus / ShortformFAULHABER motionTechnische informatie
    • Productconformiteit
      • REACHRoHSConformiteitsverklaringenCertificaten
    • FAULHABER Motion Manager
    • Bedieningshandleidingen
    • Inkoop

  • Carrière
    • Career Germany
      • Job vacancies
      • Career opportunities
        • For school students
        • For university students
        • For career starters
        • For specialist and managers
      • Events
      • What we offer
        • Life & work
        • Professional development
        • Compensation & benefits
        • Family and career
    • Career Switzerland
      • Job vacancies
      • Career opportunities
        • For Apprentices
        • For career starters
        • For specialist and managers
      • Events
      • What we offer
        • Life & work
        • Professional development
        • Compensation
        • Family and career

  • News & Events
    • Nieuws
    • Events
    • Press

  • Over FAULHABER
    • Bedrijfsprofiel
    • Dienstenaanbod
    • Innovatie
    • Kwaliteit
    • Milieubeleid
    • Missie en visie
    • Code of Conduct
    • Vestigingen
      • DR. FRITZ FAULHABER GMBH & CO. KG (DE)FAULHABER MINIMOTOR SA (CH)FAULHABER PRECISTEP SA (CH)FAULHABER Motors Hungaria Kft. (HU)FAULHABER Motors Romania S.R.L. (RO)FAULHABER Benelux B.V. (NL)FAULHABER France SAS (FR)FAULHABER Austria GmbH (AT)FAULHABER Polska sp. z o.o. (PL)FAULHABER Drive System Technology (Taicang) Co., Ltd. (CN)FAULHABER Singapore Pte Ltd (SG)FAULHABER Malaysia Sdn Bhd (MY)
    • FAULHABER GROUP

  • Contact
    • Contactformulier
    • FAULHABER wereldwijd
    • Colofon
    • Condities
    • E-mailversleuteling

  • FAULHABER wereldwijd
  • Markten
  • Lucht- & ruimtevaart
  • Measuring sensor

Space-saver

Combining outstanding performance with a small footprint, microdrives are predestined for a wide range of applications. Their low weight and long-term reliability make them useful for space exploration applications, among other things.

Every kilogram of weight which goes into orbit costs a hundred times its weight in fuel. So microdrives are an excellent solution. At the same time, they are always ready for action, tolerate short-term overloads and are resistant to both cold and heat if modified slightly with respect to materials and lubrication of the standard components. This makes them an enormously affordable drive for space technology, without compromising on reliability or service life.
Our modern world is founded on the use of electricity, electromagnetic waves and electronic devices. But all this essential technology is easily influenced by external sources. The interaction between solar wind and the earth's magnetic field not only creates the impressive natural spectacle of the Northern Lights, it has also paralyzed whole electricity and telephone networks in northern countries. In order to research the influence of the Earth's magnetosphere on our modern world, NASA is sending four measurement probes into space in a rocket in August 2014. Each of the satellites contains four stepper motor gear units provided by FAULHABER affiliate MICROMO in the USA. They are responsible for winding and unwinding the actual measurement cable.

No second chances

Space exploration is an expensive business. For many missions, there is only one chance. If it goes wrong, there are no resources for a second attempt. So there are two very important aspects: the mission needs to be as reliable and as affordable as possible. This is where the requirements of space technology overlap with those of our more 'terrestrial' industries. Modern microdrive technology is now so well developed that it needs no special modification for extreme service conditions. Mostly, relatively small optimizations are all that is needed to meet the requirements.
When NASA was looking for a drive for its Magnetospheric Multiscale Mission (MMS) which was small and lightweight and at the same time powerful and reliable in the long term, it found it at FAULHABER's affiliate in the United States. Small-sized Stepper Motors have been chosen to wind and unwind four magnetic field measuring cables – around 60 m in length – for each probe. As the mission aims to observe the effects of solar wind on the Earth's magnetic field, it is set to take several years. In the first year, observations will focus on the region between the Earth and the sun. In the second year, the probes will be reprogrammed and the area facing away from the sun will be observed, i.e. in the lee, where the magnetic field spreads out like a flag in the solar wind. With four satellites, each with four measuring cables plus the development and testing kit on Earth, they needed 40 modified space-compatible drive units.

The Earth's magnetic field is distorted by solar wind. Exact measurement data on this will allow predictions on any disruptions on Earth
Compact, easy-to-control drives based on Stepper Motors can face up to all sorts of different challenges like this probe unwind unit.

Hard at work

As well as their weight and volume benefits, miniature Stepper Motors have other advantages which ensure reliable operation. They do not require a particularly demanding controller. Simple Stepper Motor Controllers, which can be designed to be very robust, are perfectly adequate for operation. The higher the level of integration of the electronics, the more hazardous it is to use them in space, given the bombarding with cosmic rays. This requires additional shielding and increases the mass of the drive controller. The motors are connec­ted directly to the reducing gears. The total length of the compact unit is just a fraction over 56 mm. But the unit can still put out up to 0,5 Nm at the drive shaft.
The major changes to the engine and drives are related to lubrication and a release hole for the fast breather required for the start. The latter is particularly important because, as we know, a rocket leaves the atmosphere very quickly. If you have ever driven fast uphill or downhill, you will know the feeling of having your ears go pop. The release holes allow the air to escape rapidly and thus prevent damage caused by excessive internal pressure. When it comes to lubrication, it is important to find a material which is resistant to extremes of temperature and does not evaporate in a vacuum. The standard components, i.e. the bearing for the motors and gearwheels for the gears, have therefore been lubricated with a special material. All the drives had to be separately marked and issued with an appropriate approval certificate. They were then ready for their space mission.
The modern standard technology for micromotors can produce drives virtually off the peg, even those which need to meet extreme requirements. Minor adjustments to the design or materials or lubrication are all that is required to meet even the exacting demands of space exploration.

Arrangement of the "cable winder drives" in the satellite.

Video

Products

Stepper Motors

Further information

NASA
www.mms.gsfc.nasa.gov

Producten

  • DC-motoren
  • Borstelloze DC-motoren
  • Motoren met geïntegreerde electronica
  • Lineaire DC-servomotoren
  • Stappenmotoren
  • Industriële aandrijvingen
  • Piezo motors
  • Precisietandwielkasten
  • Lineaire componenten
  • Encoders
  • Aandrijfelectronica
  • Accessoires

Markten

  • Medische en laboratoriumapparatuur
  • Fabrieksautomatisering & robotica
  • Precisiecontrole & meettechniek
  • Industrieel gereedschap en materiaal
  • Lucht- & ruimtevaart
  • Camera, audio en data
  • Optica & fotonica
  • Bescherming van milieu & gezondheid
  • Modelbouw & prototypes
  • Consumer

Support

  • Drive Electronics
  • Encoder
  • Motors
  • Documentatie
  • Productconformiteit
  • FAULHABER Motion Manager
  • Bedieningshandleidingen
  • Inkoop

Carrière

  • Career Germany
  • Career Switzerland

News & Events

  • Nieuws
  • Events
  • Press

Over FAULHABER

  • Bedrijfsprofiel
  • Dienstenaanbod
  • Innovatie
  • Kwaliteit
  • Milieubeleid
  • Missie en visie
  • Code of Conduct
  • Vestigingen
  • FAULHABER GROUP

Contact

  • Contactformulier
  • FAULHABER wereldwijd
  • Colofon
  • Condities
  • E-mailversleuteling
  • Colofon
  • Condities
  • Producten
    • DC-motoren
      • DC-micromotoren
        • 0615...S 0816...SR 1016...SR 1024...SR 1219...G 1224...SR 1319...SR 1331...SR 1336...CXR 1516...S 1516...SR 1524...SR
        • 1624...S 1717...SR 1724...SR 1727...CXR 1741...CXR 2224...SR 2230...S 2232...SR 2233...S 2237...CXR 2342...CR 2642...CR
        • 2642...CXR 2657...CR 2657...CXR 2668...CR 3242...CR 3257...CR 3272...CR 3863...CR 3890...CR
      • Platte DC-micromotoren en DC-tandwielmotoren
        • 1506...SR 1506...SR IE2-8 1512...SR 1512...SR IE2-8 2607...SR 2607...SR IE2-16 2619...SR 2619...SR IE2-16
    • Borstelloze DC-motoren
      • Borstelloze DC-servomotoren
        • 0308...B 0515...B 0620...B 0824...B 1028...B 1218...B 1226...B 1628...B 1660...BHS 1660...BHT 2036...B 2057...B
        • 2057...BHS 2232...BX4 2250...BX4 2250...BX4S 2264...BP4 2444...B 3056...B 3242...BX4 3268...BX4 3274...BP4 3564...B 4490...B
        • 4490...BS
      • Borstelloze platte DC-micromotoren en Borstelloze DC-tandwielmotoren
        • 1509...B 1515...B 2610...B 2622...B
    • Motoren met geïntegreerde electronica
      • Motoren met geïntegreerde Speed Controller
        • 1525...BRC 1935...BRC 2232...BX4 SC 2250...BX4 SC 2250...BX4S SC 2610...B SC 2622...B SC 3153...BRC 3242...BX4 SC 3242...BX4 SCDC 3268...BX4 SC 3268...BX4 SCDC
      • Motoren met geïntegreerde Motion Controller
        • 2232...BX4 CxD 2250...BX4 CxD 3242...BX4 Cx 3268...BX4 Cx 3564...B Cx MCS 3242...BX4 ET MCS 3242...BX4 RS/CO MCS 3268...BX4 ET MCS 3268...BX4 RS/CO MCS 3274...BP4 ET MCS 3274...BP4 RS/CO
    • Lineaire DC-servomotoren
      • LM 0830...01 LM 1247...11 LM 1247...12 LM 1483...11 LM 1483...12 LM 2070...11 LM 2070...12
    • Stappenmotoren
      • AM0820 AM1020 AM1524 AM2224 AM2224R3 DM0620 DM1220
    • Industriële aandrijvingen
      • 6091...DC01 MA... 6091...DC01 MD...
    • Piezo motors
      • LL06... LL10... LR17... LR50... LR80... LT20... LTC300... LTC40... LTC450...
    • Precisietandwielkasten
      • Planetaire reductoren
        • 03A 06/1 06A 08/1 10/1 12/4 13A 14/1 15/10 15A 16/7 17/1
        • 20/1R 22/7 22E 22EKV 22F 23/1 26/1 26/1R 26A 30/1 30/1S 32/3
        • 32/3R 32A 32ALN 38/1 38/1S 38/2 38/2S 38A 44/1
      • Spurgears en Spurgears, spelingsvrij
        • 08/2 08/3 12/3 12/5 15/5 15/5S 15/8 16/5 16/5S 16/8 16A 22/2
        • 22/5
    • Lineaire componenten
      • kogelomloopspindels
        • BS22-1.5 BS32-2.0
      • Spindels en opties
        • M1,2 x 0,25 x L1 M1,6 x 0,35 x L1 M2 x 0,2 x L1 M3 x 0,5 x L1
    • Encoders
      • Incrementele encoder
        • HEDL 5540 HEDS 5500 HEM3-256 HXM3-64 IE2-1024 IE2-16 IE2-400 IE3-1024 IE3-1024L IEH2-4096 IEH3-4096 IEM3-1024
        • IER3-10000 IER3-10000L IERS3-500 IERS3-500L PA2-100 PA2-50 PE22-120
      • Absolute encoders
        • AES-4096 AESM-4096
    • Aandrijfelectronica
      • Speed Controllers
        • SC 1801 F SC 1801 P SC 1801 S SC 2402 P SC 2804 S SC 5004 P SC 5008 S
      • Motion Controllers
        • MC 5004 P MC 5005 S MC 5010 S MCBL 3002 F MCBL 3002 F AES MCBL 3002 P MCBL 3002 P AES MCBL 3002 S MCBL 3002 S AES MCBL 3003 P MCBL 3003 P AES MCBL 3006 S
        • MCBL 3006 S AES MCDC 3002 P MCDC 3002 S MCDC 3003 P MCDC 3006 S MCLM 3002 F MCLM 3002 P MCLM 3002 S MCLM 3003 P MCLM 3006 S MCST 3601
    • Accessoires
      • 6501.00065 6501.00088 6501.00096 6501.00097 6501.00113 6501.00121 6501.00135 6501.00136 6501.00159 6501.00283 6501.00284 BC 5004
      • Cables and Accessories MBZ
  • Markten
    • Medische en laboratoriumapparatuur
      • Insulinepomp
      • Analytisch apparaat Gyrolab xPlore TM
      • Laboratoriumautomatisering
      • Anaesthesia and ventilation system
      • Myo-elektrische prothese
      • Wortelkanaalbehandeling zonder Stress
      • Prosthetics LifeHand
      • Tattoo machine
      • Sample distribution system
      • Robotic assistant for TMS
      • ViKY (Vision Control for endoscopY)
      • Blood pressure measuring
      • Drug dispenser
      • Diagnostic and therapy capsules
      • XYZ manipulator
      • Controlled prosthetic leg
      • Blood circulation scanner
      • Laboratory analysis systems
      • Microkeratome
      • Blood glucose meter
      • Miniature hexapods
    • Fabrieksautomatisering & robotica
      • Diepzee robot
      • Inspectie robots
      • Zippermast
      • Small parts gripper
      • Industrial robots
      • CHIMP robot
      • Unmanned Ground Ve­­­hicle
      • MROV (Miniature Remotely Operated Vehicles)
      • Humanoid service robots
      • Robotic arm
      • Robotic hand
      • Robot Vehicle
      • Assembly machines
      • Manufacture robotik
      • Sewer Robot
      • Shrimp Vehicle
      • Belt conveyors
      • Electropneumatic Swivel Unit
    • Precisiecontrole & meettechniek
      • Doseerpomp
      • Testfaciliteiten voor autodeuren
      • Breedbandseismometers
      • Condor Sigma test device
      • Electric field meters
      • Stripping machines
      • Nanomeasurement
      • Horizontal Balancing Machines
      • Precision dispenser
      • Dial Gauge Testing
      • Ring shear tester
      • Geo-Scanner
    • Industrieel gereedschap en materiaal
      • Sensorschroevendraaier
      • Inkjet labelling system
      • Elektrische snoeischaren
      • 5-axis CNC unit
      • Adaptive Wire Feeder
      • Solar wafer production
      • Window Wipers
      • Weighing System
      • Linear positioners
      • Pressure pulsations
      • Laser welding
      • Hexapod (Micropositioning technology)
      • Flying-Probe-Systems
      • Printing machine
      • Cutting Plotter
    • Lucht- & ruimtevaart
      • Mars Rover
      • Amfibische vliegtuig
      • Cabinetechniek
      • Comet probe "Rosetta Mission"
      • Hexapod
      • Control rocket fuel valves
      • UAVs (Unmanned Aerial Vehicle)
      • Measuring sensor
    • Camera, audio en data
      • Panoramic camera
      • Camera set up
      • Reconnaissance Drones
      • LCD displays
      • Camera head inspection devices
      • Camera Cranes
      • Live Camera Systems
    • Optica & fotonica
      • Röntgenlenzen
      • Pulsed-laser beams
      • Surgical vision systems
      • Microscope Scanning Stage
      • Surgical microscope head set
      • Giant telescope
      • LBT (Large Binocular Telescope)
    • Bescherming van milieu & gezondheid
      • Automatische mechatronische zekeringssysteem voor klimmers (EPIC)
      • ATEX Pump drive
      • Energy kites
      • Seismometer
      • Micro annular gear pump
      • Deep-Sea Sensors
    • Modelbouw & prototypes
      • Zelfrijdende raceautos's
      • Miniatur Wunderland
      • Commercial Vehicle Replicas
      • Spherical Vehicle
      • Model steam locomotive
      • Football robot
    • Consumer
      • Kinetische sculptuur in de showroom
      • e-Caddies
      • Stoelloze stoel
      • Horlogebeweger
      • Design Water dispenser
      • Soccer robots
  • Support
    • Drive Electronics
      • Application Notes for Drive Electronics
      • Drive Electronic FAQ's
      • Downloads
      • Documentation for Drive Electronics
    • Encoder
      • Application Notes for Encoders & Sensors
      • Encoder FAQ's
      • Documentation for Encoders
    • Motors
      • Motor Application Notes
      • Documentation for Motors
    • Documentatie
      • FAULHABER Catalogus / Shortform
      • FAULHABER motion
      • Technische informatie
    • Productconformiteit
      • REACH
      • RoHS
      • Conformiteitsverklaringen
      • Certificaten
    • FAULHABER Motion Manager
    • Bedieningshandleidingen
    • Inkoop
  • Carrière
    • Career Germany
      • Job vacancies
      • Career opportunities
        • For school students
        • For university students
        • For career starters
        • For specialist and managers
      • Events
      • What we offer
        • Life & work
        • Professional development
        • Compensation & benefits
        • Family and career
    • Career Switzerland
      • Job vacancies
      • Career opportunities
        • For Apprentices
        • For career starters
        • For specialist and managers
      • Events
      • What we offer
        • Life & work
        • Professional development
        • Compensation
        • Family and career
  • News & Events
    • Nieuws
    • Events
    • Press
  • Over FAULHABER
    • Bedrijfsprofiel
    • Dienstenaanbod
    • Innovatie
    • Kwaliteit
    • Milieubeleid
    • Missie en visie
    • Code of Conduct
    • Vestigingen
      • DR. FRITZ FAULHABER GMBH & CO. KG (DE)
      • FAULHABER MINIMOTOR SA (CH)
      • FAULHABER PRECISTEP SA (CH)
      • FAULHABER Motors Hungaria Kft. (HU)
      • FAULHABER Motors Romania S.R.L. (RO)
      • FAULHABER Benelux B.V. (NL)
      • FAULHABER France SAS (FR)
      • FAULHABER Austria GmbH (AT)
      • FAULHABER Polska sp. z o.o. (PL)
      • FAULHABER Drive System Technology (Taicang) Co., Ltd. (CN)
      • FAULHABER Singapore Pte Ltd (SG)
      • FAULHABER Malaysia Sdn Bhd (MY)
    • FAULHABER GROUP
  • Contact
    • Contactformulier
    • FAULHABER wereldwijd
    • Colofon
    • Condities
    • E-mailversleuteling
  • Language
    • English
    • Deutsch
    • Français
    • 中文
    • Nederlands
  • Home