DC Motors best practice

English German

In this webinar, our expert will show you everything you need to know about DC motor technologies, enabling you to better understand the differences of our individual motor series and their best use in different applications. The characteristics of our precious metal and graphite commutated motors will be explained with practical tips and advice on their use, the data-sheet explanations will give you extensive information so that you will know how to get the best performance out of your FAULHABER DC motor, depending on the used technology. Our expert will also provide you with the best tips and tricks to achieve the longest lifetime of your motor, depending on the motor’s drive control mode.

vidéo

Language: English

Expert

Mario Zecchin

Product Manager

mario.zecchin@faulhaber.com

After obtaining a Master in Applied Electronics Engineering from University of Padua, Mario Zecchin worked as development engineer for Micromotori Elettrici Svizzera SA, Stabio, responsible for automotive headlamp actuators, followed by holding a position as scientific mechatronics staff at Scuola Universitaria Professionale della Svizzera Italiana (SUPSI), collaborating with Swiss industries for innovative projects. Zecchin joined FAULHABER MINIMOTOR SA in 2007 as product manager motion control and since 2013 he works as senior sales engineer.

vidéo

Language: German

Topics:

Introduction to FAULHABER DC motors
Commutation technologies components
Characteristics of precious metal and graphite commutation systems
The DC-motor data-sheet explained: motor data, thermal data, rated values, motor characteristics curves, mechanical interface and drawings, options and combinations
DC motor current calculation
DC motors best practice: fixed and variable supply voltage, PWM control, Lifetime consideration

Expert

Anton Kascheutow

Inside Sales Engineer

anton.kascheutow@faulhaber.de

With his background as a Bachelor of Engineering, acquired at Aalen University, Anton Kascheutow has more than 8 years of experience in application consultancy and sales. He has been working at FAULHABER as an application consultant in the Sales department for 4 years and is currently jointly responsible for technical application consultancy for the German market. He specializes in customer-specific solutions, checking their feasibility and analyzing potential approaches.