Career Press Suppliers
Career Press Suppliers
DC-Motors in electronic control robots steered using a cable remote control and a monitor

The large and extensive sewage networks operated by local authorities and companies, which are often quite old, require regular maintenance. In an increasing number of cases there is minor and major damage to be repaired. For such work on the pipe system PROKASRO, a sewer robot specialist, developed an extensive range of tools and equipment. From an autonomous service vehicle with auxiliary equipment such as a generator, compressor, water tank, and electronic control the robot is steered using a cable remote control and a monitor.

DC-Motors in electronic control robots steered using a cable remote control and a monitor
Service vehicle fully equipped for autonomous robot operation.

Trailing cable

Sewer robots have various sizes, tooling, and other specific features depending on the type of service. What they all have in common is supply and control via a supply cable. The supply cable, the so-called twin cable which is suitable for all laterally running remediation systems, pulls the robot behind itself through the sewage pipe. The standard length is 120 m, but lengths of up to 200 m are also possible. At this length and with the dirt that occurs again and again in the sewer, a powerful drive is, of course, the basic prerequisite for trouble-free operation.. At that length and with the amount of dirt that always occurs in the sewer a powerful drive is absolutely vital for smooth operation.

The problem was solved by using miniature DC motors incorporating a coreless rotor - made by FAULHABER.

For example, one version of the robot is equipped with nine motors of this type in order to allow flexible operation under ground. The drive used consists of four axes each comprised of one Series 3557...CR motor. The motor is coupled to a gearhead in order to be able to ensure optimal adjustment of speed and traction.

The advantage of this solution is that the same robot can work in large pipes with large wheels; appropriately stepped-down gears reduce the rotary speed in proportion to wheel size. Velocity and traction are thus kept independent of wheel diameter; the operator at the service vehicle can work as accustomed. A secure stance is provided by a pneumatic cylinder that presses the upper pairs of wheels against the inside of the pipe. Even slight damage like cracks or dents in the pipe are easily negotiated by the rubber-tired wheels. Despite their small size, the combined traction of the four drive motors is around 1,000 N (in other words 100 kg).

DC-Motors in electronic control robots steered using a cable remote control and a monitor
Different versions of robots, depending on the application.
DC-Motors in electronic control robots steered using a cable remote control and a monitor

Mobile head

In order to examine and work on each part of the pipe interior, the front of the robot is provided with a swiveling camera an electric cutter with up to 3000 W of power are integrated in the front side of the robot. DC-micromotors are used for movement here as well. Another motor mounted between the wheel drives allows the robot head to rotate around its longitudinal axis.

Inside of the head itself there is a DC motor in the tilting device of the milling machine.

Two small motors allow camera panning and control the focusing mechanism.

The chief advantage of FAULHABER drives in this case is their high power density, making the robot so small that it can be deployed from a pipe diameter of 200 mm upward. It is, however, also suited for pipe sizes of up to DN1200.

Being low-voltage motors with a voltage supply of less than 42 V, they satisfy the requirements for underwater operation. The high level of efficiency maintains the waste heat inside of the enclosed housing, which is kept at positive pressure with compressed air, within reasonable limits. An essential aspect is also the direct response to control commands. Movement on the monitor image and movement of the robot have to be virtually synchronized and delays due to motor ramps must be minimal.

DC-Motors in electronic control robots steered using a cable remote control and a monitor
Mobile camera: a panning motor and a focusing motor in the camera head ensure sharp images.
DC-Motors in electronic control robots steered using a cable remote control and a monitor

That is the only way in which the operator can move the robot reliably inside of the pipe having undergone only a short period of familiarization.

Nowadays, sewer robots with state-of-the-art camera electronics and drive components reduce the cost of inspection, maintenance, and repairs to underground sewer networks. Optimally configured, extremely small drive solutions are the key component to enable flexible activities even in narrow pipes. The reliability of miniature DC motors and their high level of efficiency permit extremely compact designs.

Products

FAULHABER CR
Best dynamic performance due to a low rotor inertia
Shockproof all-steel housing with corrosion-resistant coating
Powerful rare-earth magnet
Extremely wide operating temperature range -30 °C to 125 °C (optionally -55 °C, winding up to 155 °C)
Durable graphite commutation
No cogging
Highest power density
Details
Further information

Recommended contents

Here you will find external YouTube contents for the article. Click to watch.

I consent to being shown external contents. I am aware that personal data may be shared with third-party platforms. For more information, refer to our privacy policy.